Honda HR-V: Braking
Honda HR-V (2015-2021) Owner's Manual / Driving / Braking
READ NEXT:
Brake System
■Parking Brake
Use the parking brake to keep the vehicle stationary when parked. You can
manually apply and release, or automatically release it.
You may hear the electric parking brake system
opera
Automatic Brake Hold
Continuously variable transmission models
Keeps the brake applied after releasing the brake pedal until the accelerator
pedal is
pressed. You can use this system while the vehicle is temporarily stop
Anti-lock Brake System (ABS)
■ABS
Helps prevent the wheels from locking up, and helps you retain steering
control by
pumping the brakes rapidly, much faster than you.
The electronic brake distribution (EBD) system, which is p
SEE MORE:
Cylinder Head Removal and Installation
Removal
NOTE:
Use fender covers to avoid damaging painted surfaces.
To avoid damaging the wiring and terminals, unplug the wiring connectors
carefully while holding the
connector portion.
Connect the HDS to the DLC, and monitor ECT SENSOR 1. To avoid damaging
the cylinder head,
wait until
Interpreting A Voltage Controlled Pattern
NOTE: Voltage controlled drivers are also known as "Saturated Switch"
drivers. They
typically require injector circuits with a total leg resistance of 12 ohms or
more.
NOTE: This example is based on a constant power/switched ground circuit.
See Fig. 2 for pattern that the following text describe
© 2019-2025 Copyright www.hohrv2.com
