Honda HR-V: Clutch Trouble Shooting
* PLEASE READ THIS FIRST *
NOTE: This is GENERAL information. This article is not intended to be
specific to any
unique situation or individual vehicle configuration. For model-specific
information see appropriate articles where available.
ALL MODELS
NOTE: This is GENERAL information. This article is not intended to be
specific to any
unique situation or individual vehicle configuration. For model-specific
information see appropriate articles where available.
CLUTCH TROUBLE SHOOTING


READ NEXT:
* PLEASE READ THIS FIRST *
NOTE: This is GENERAL information. This article is not intended to be
specific to any
unique situation or individual vehicle configuration. For model-specific
information s
* PLEASE READ THIS FIRST *
NOTE: This article is intended for general information purposes only.
Contents are
generic in nature and all information may or may not apply to all vehicles.
INTRODUCTION
SEE MORE:
Special Tools Required
Relay Puller 07AAC-000A2A1 or
07AAC-000A1A0
Removal & Installation
NOTE: The under-hood fuse/relay box is a part of the left engine compartment
wire harness, and it cannot be
replaced by itself.
1. 12 Volt Battery Terminal - Disconnect
2. PCM - Remove
3. Under-Hood Fuse/
Inspection
1. Mainshaft Assembly Clearance - Inspect
Support the bearing inner race with an appropriate sized socket (A), and
push down
on the mainshaft (B)
Measure the clearance between 2nd gear (C) and 3rd gear (D) with a
feeler gauge
(E).
If the clearance exceeds the service limit, go