Honda HR-V Owners & Service Manuals

Honda HR-V: "O"

Honda HR-V (2015-2021) Service Manual / General Information / Emission Control Abbreviations (Gasoline & Diesel) / "O"

OBD

On-Board Diagnostic System

PBD (F)/(P)

Full/Partial On-Board Diagnostic

OC

Oxidation Catalytic Converter

OHC

Overhead Cam

ORVR

On-Board Refueling Vapor Recovery

ORVR-COV

ORVR Cut-Off Valve

ORVR-CV

ORVR Control Valve

ORVR-FAV

ORVR Fresh Air Valve

ORVR-FMV

ORVR Flow Management Valve

ORVR-FTVCV

ORVR Fuel Tank Vapor Control Valve

ORVR-FTVRV

ORVR Fuel Tank Vapor Recirculation Valve

ORVR-FVRS

ORVR Fuel Vapor Recovery System

ORVR-FVV

ORVR Fuel Vent Valve

ORVR-LV

ORVR Leveling Valve

ORVR-OCKV

ORVR Overfill Check Valve

ORVR-RCV

ORVR Refueling Control Valve

ORVR-VCV

ORVR Vapor Cut Valve

ORVR-VRV

ORVR Vapor Recirculating Valve

ORVR-VSV

ORVR Vent Shut Valve

ORVR-VV

ORVR Vent Valve

OVCV

Outer Vent Control Valve

O2S

Oxygen Sensor

    READ NEXT:

     "P", "R"

    "P" PAIR Pulsed Secondary Air Injection PAIR-ABV PAIR Anti-Backfire Valve PAIR-ACOV PAIR Air Cut-Off Valve PAIR-ACS PAIR Air Control Solenoid PAIR-ACV PAIR Air Control Valve PAIR-AIV PAIR Air Injectio

     "S"

    SAI-SV Secondary Air Injection Shutoff Valve SAIR-CV Secondary Air Injection Control Valve SC Supercharged or Super Charger SC MFI Supercharged Multiport Fuel Injection SCR Selective Catalytic Reducti

     "T", "V", "W"

    "T" TAA Turbo Air-To-Air TAA Throttle Actuator Assembly TAB Thermactor Air By-Pass TAD Thermactor Air Diverter TAC Thermostatic Air Cleaner TBI Throttle Body Injection TBPCS Throttle By-Pass Control S

    SEE MORE:

     CVT System Description - Hydraulic Controls (CVT)

    The hydraulic control system is controlled by the transmission fluid pump, the valves, and the solenoid valves. The transmission fluid pump is driven by the engine turns. The transmission fluid pump drive sprocket is connected to the stator shaft, turns as the engine turns, and drives the transmi

     DTC B0050-11

    NOTE: Before doing this troubleshooting procedure, find out if the vehicle was in a collision. If so, verify that all the required components were replaced with new components, of the correct part number, and that they were properly installed. Before doing this troubleshooting procedure, re

    © 2019-2026 Copyright www.hohrv2.com