Honda HR-V Owners & Service Manuals

Honda HR-V: DTC C0044-F0 Master Cylinder Pressure Sensor Malfunction

NOTE : Before you troubleshoot, review the how to troubleshoot information - Refer to: How to Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure Warning (LDW).

Multipurpose Camera Unit - Diagnosticsc

DTCs (FCW/LDW)

1. Problem verification.

  1. Turn the vehicle to the ON mode.
  2. Clear the DTC with the HDS.

Clear DTCs

  1. Turn the vehicle to the OFF (LOCK) mode.
  2. Wait for 10 seconds.
  3. Turn the vehicle to the ON mode.
  4. Check for DTCs with the HDS.

Multipurpose Camera Unit - Diagnosticsc

Is DTC C0044-F0 indicated?

YES

Go to VSA system troubleshooting.

NO

Intermittent failure, the system is OK at this time.

DTC C0063-F0 YAW RATE SENSOR MALFUNCTION

NOTE : Before you troubleshoot, review the how to troubleshoot information - Refer to: How to Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure Warning (LDW).

Multipurpose Camera Unit - Diagnosticsc

DTCs (FCW/LDW)

1. Problem verification.

  1. Turn the vehicle to the ON mode.
  2. Clear the DTC with the HDS.

Clear DTCs

  1. Turn the vehicle to the OFF (LOCK) mode.
  2. Wait for 10 seconds.
  3. Turn the vehicle to the ON mode.
  4. Check for DTCs with the HDS.

Multipurpose Camera Unit - Diagnosticsc

Is DTC C0063-F0 indicated?

YES

Go to VSA system troubleshooting.

NO

Intermittent failure, the system is OK at this time.

DTC U0029-00 F-CAN COMMUNICATION BUS LINE ERROR (BUS-OFF)

NOTE : Before you troubleshoot, review the how to troubleshoot information - Refer to: How to Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure Warning (LDW).

Multipurpose Camera Unit - Diagnosticsc

DTCs (FCW/LDW)

1. Problem verification.

  1. Turn the vehicle to the ON mode.
  2. Clear the DTC with the HDS.
  3. Check for poor connections or loose terminals at the multi purpose camera unit.
  4. Turn the vehicle to the OFF (LOCK) mode.
  5. Wait for 10 seconds.
  6. Turn the vehicle to the ON mode.
  7. Check for DTCs with the HDS.

Multipurpose Camera Unit - Diagnosticsc

Is DTC U0029-00 indicated?

YES

Check for poor connections or loose terminals at the multi purpose camera unit. If the multi purpose camera unit was updated, replace the multi purpose camera unit.

NO

Intermittent failure, the system is OK at this time.

    READ NEXT:

     DTC U0051-96 Steering Angle Sensor Malfunction

    NOTE : Before you troubleshoot, review the how to troubleshoot information - Refer to: How to Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure Warning (LDW

     DTC U0122-00 Lost Communication With VSA

    NOTE : Before you troubleshoot, review the how to troubleshooting information - Refer to: How to Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure Warning (

     DTC U0126-00 Lost Communication With Steering Angle Sensor

    NOTE : Before you troubleshoot, review the how to troubleshooting information - Refer to: How to Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure Warning (

    SEE MORE:

     DTC Troubleshooting 86-12, 86-13, 86-14, 86-16, 86-19, 86-21, 86-22: F-CAN Communication Malfunction

    NOTE: Before you troubleshoot, review the general troubleshooting information. Refer to the DTC code shown on the display, and then inspect the connectors and terminals based on the instructions in the table below. The DTC may be stored due to loss of voltage supply or ground at the transmi

     Oil Pump

    * PLEASE READ THIS FIRST * NOTE: Examples used in this article are general in nature and do not necessarily relate to a specific engine or system. Illustrations and procedures have been chosen to guide mechanic through engine overhaul process. Descriptions of processes of cleaning, inspection, asse

    © 2019-2026 Copyright www.hohrv2.com