Honda HR-V: DTC U0126-00 Lost Communication With Steering Angle Sensor
NOTE : Before you troubleshoot, review the how to troubleshooting information
- Refer to: How to
Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the
Lane Departure
Warning (LDW).
DTCs (FCW/LDW)
1. Problem verification.
- Turn the vehicle to the ON mode.
- Clear the DTC with the HDS.
- Check for poor connections or loose terminals at the steering angle
sensor and the junction connector.
- Turn the vehicle to the OFF (LOCK) mode.
- Wait for 10 seconds.
- Turn the vehicle to the ON mode.
- Check for DTCs with the HDS.
Is DTC U0126-00 indicated?
YES
Go to VSA system troubleshooting.
NO
Intermittent failure, the system is OK at this time.
DTC U0155-00 LOST COMMUNICATION WITH GAUGE CONTROL MODULE
DTC Troubleshooting: U0155-00
NOTE : Before you troubleshoot, review the how to troubleshooting information
- Refer to: How to
Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the
Lane Departure
Warning (LDW).
DTCs (FCW/LDW)
1. Problem verification.
- Turn the vehicle to the ON mode.
- Clear the DTC with the HDS.
- Check for poor connections or loose terminals at the gauge control
module and the junction
connector.
- Turn the vehicle to the OFF (LOCK) mode.
- Wait for 10 seconds.
- Turn the vehicle to the ON mode.
- Check for DTCs with the HDS.
Is DTC U0155-00 indicated?
YES
Go to gauge control module troubleshooting.
NO
Intermittent failure, the system is OK at this time.
READ NEXT:
NOTE : Before you troubleshoot, review the how to troubleshoot information -
Refer to: How to Troubleshoot
the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure
Warning (LDW
NOTE : Before you troubleshoot, review the how to troubleshoot information -
Refer to: How to Troubleshoot
the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure
Warning (LDW
NOTE : Before you troubleshoot, review the how to troubleshoot information -
Refer to: How to Troubleshoot
the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure
Warning (LDW
SEE MORE:
TESTING
AWD CONTROL UNIT INITIALIZATION (AWD)
Procedure
NOTE:
Whenever the AWD control unit is replaced, it must be initialized.
Park the vehicle on a flat and level surface.
1. HDS - Connect
2. AWD Control Unit - Initialization
Select the ADJUSTMENT in the AWD WITH INTELLIGENT CONTROL with t
■Vehicle Specifications
*1: 2WD
*2: AWD
■Engine Specifications
■Fuel
■Washer Fluid
■Light Bulbs
■Brake Fluid
■Continuously Variable Transmission
Fluid*
*1: 2WD
*2: AWD
■Manual Transmission Fluid*
■Rear Differential Fluid*
■Engine Oil
■Engine Coolant
*1: Continuously