Honda HR-V: Gauges - Testing & Troubleshooting
READ NEXT:
GAUGES SYSTEM DESCRIPTION - CONTROL/FUNCTION
Speedometer and Tachometer
The PCM provides a vehicle speed signal to the gauge control module using the
F-CAN. Based on this input,
the gauge control mod
Test
1. Driver's Dashboard Lower Cover - Remove
2. ECON Switch - Test
Check the ECON switch (A) according to the table.
NOTE:
When an LED is located between terminals, check if the LED
illumina
SEE MORE:
Special Tools Required
Vacuum Pump/Gauge, 0-30 inHg Snap-on YA4000A or equivalent, commercially
available
NOTE:
Before beginning this troubleshooting, do a customer diagnostic
interview - Refer to: Fuel and
Emissions Systems Symptom Troubleshooting - Engine stalls Diagnostic
interview, or Fu
Removal & Installation
NOTE :
Before removal and installation, turn the wiper/washer switch ON to (LO)
or (HI) position, then OFF to
return the motor shaft to the auto-stop position.
Do not use the wiper/washer switch (INT) position in this step.
Windshield
1. Windshield Wiper Arm Assembl