Honda HR-V: Inspection/Adjustment
Honda HR-V (2015-2021) Service Manual / Accessories & Equipment / Exterior Trim - Testing & Troubleshooting / Inspection/Adjustment
READ NEXT:
Fuel Fill Door Adjustment
Adjustment
1. Fuel Fill Door - Adjust
Slightly loosen the hinge mounting bolts (A)
Adjust the fuel fill door (B) in or out until it is flush with the body,
and
up or down as necessary to equali
Tailgate Adjustment
Adjustment
1. Both Tailgate Support Struts - Remove
2. Headliner - Remove (as needed)
3. Tailgate - Adjust
Slightly loosen the tailgate hinge mounting bolts (A) and the striker
mounting bolts (B).
Wiper Arm/Nozzle Adjustment
Adjustment
Windshield
1. Wiper Arm/Nozzle - Adjust
Adjust the washer nozzles by gently gripping, and then moving, the
outside of each nozzle (A).
Do not insert tools into the nozzle hole (B), as
SEE MORE:
Power Mirror Function Test
1. Disconnect the following connector.
Power mirror switch 13P connector
2. Choose the appropriate test based on the symptom:
Both mirrors do not work, go to step 3.
Left mirror does not work, go to step 5.
Right mirror does not work, go to step 6.
Mirror defogger (With power mirror defogger)
DTC U1281 (Gauge Control Module) Lost Communication With MICU (MICU
Frame)
NOTE:
Refer to the DTC code shown on the display, and then inspect the
connectors and terminals based on the
instructions in the table below.
The DTC may be stored due to the grounding failure or the power source
failure at the transmitting
control unit (the grounding inspection and the pow
© 2019-2026 Copyright www.hohrv2.com
