Honda HR-V: Exterior Trim - Testing & Troubleshooting
READ NEXT:
Adjustment
1. Fuel Fill Door - Adjust
Slightly loosen the hinge mounting bolts (A)
Adjust the fuel fill door (B) in or out until it is flush with the body,
and
up or down as necessary to equali
Adjustment
1. Both Tailgate Support Struts - Remove
2. Headliner - Remove (as needed)
3. Tailgate - Adjust
Slightly loosen the tailgate hinge mounting bolts (A) and the striker
mounting bolts (B).
SEE MORE:
Special Tools Required
Ball Joint
Remover, 28 mm
07MAC-SL00202
Ball Joint Thread
Protector, 12 mm
07AAFSDAA100
Fork Seal Driver
Weight
07747-0010100
Fork Seal Driver
Attachment, 31.2
mm
07747-0010400
Replacement
1. Vehicle - Lift
2. Front Wheels - Remove
3. Tie-Rod End Ball Joint - Disconnect
DTC (Power Control Unit)
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the
instructions in B-CAN System
Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System
Diagnosis Test Mode
A - Initial Communication and DTC Checks.
1. Problem verification:
Cle