Honda HR-V: Keyless Access Backup Control Unit - Diagnostics
READ NEXT:
DTC (Backup Control Unit)
NOTE: If you are troubleshooting multiple DTCs, be sure to
follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body
Electrical Troubleshooting - B-CA
DTC (Backup Control Unit)
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the
instructions in B-CAN System
Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN
DTC (Backup Control Unit)
NOTE: If you are troubleshooting multiple DTCs, be sure to
follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body
Electrical Troubleshooting - B-CA
SEE MORE:
When replacing, use the following bulbs.
High/Low beam headlight: 60/55 W (HB2 for halogen bulb type)
■High/Low Beam Headlight
1. Remove the coupler.
2. Remove the rubber weather seal.
3. Remove the hold-down wire, then remove
the bulb.
4. Insert a new bulb.
5. Reinstall the hold-down wire. Ho
Removal
NOTE:
Make sure the HDS or the MVCI has the latest HDS software version.
If you are replacing the PCM after substituting a known-good PCM,
reinstall the original PCM, then do
this procedure.
If you are removing or substituting the PCM, skip the procedures of READ
DATA (Engine Oil Li