Honda HR-V: Suspension System - Inspection, Overhaul & Adjustment
READ NEXT:
DESCRIPTION
SUSPENSION SYSTEM DESCRIPTION - OVERVIEW
Fig. 1: Suspension System Components
INSPECTION/ADJUSTMENT
FRONT LOWER ARM BALL JOINT INSPECTION
Inspection
When inspecting the ball joint, the
FRONT DAMPER/SPRING DISASSEMBLY, REASSEMBLY, AND INSPECTION
Exploded View
Damper/Spring - Exploded View
Fig. 3: Damper/Spring - Exploded View With Torque Specifications
Disassembly
NOTE:
When compr
Special Tools Required
Bearing Driver Attachment, 40 mm
07GAF-SE00200
Inspection
1. Ball Joint Boot - Inspect
Check the ball joint boot for weakness, damage, cracks, and grease
leaks.
NOTE:
If
SEE MORE:
Procedure
The idle learn procedure must be done so the PCM can learn the engine idle
characteristics.
Do the idle learn procedure whenever you do any of these actions:
Replace the PCM.
Reset the PCM.
Update the PCM.
Replace or clean the throttle body.
When the engine or transmission is disas
NOTE:
Before doing this troubleshooting procedure, find out if the vehicle was
in a collision. If so, verify
that all the required components were replaced with new components of the
correct part number,
and that they were properly installed.
Before doing this troubleshooting procedure, rev