Honda HR-V: Suspension System
READ NEXT:
Removal & Installation
1. Vehicle - Lift
2. Front Wheel - Remove
3. Stabilizer Link - Disconnect
Disconnect the stabilizer link from the damper.
4. Damper/Spring Items - Remove
Fig. 1: Brake H
Special Tools Required
Ball Joint Thread Protector, 12 mm 07AAF-SDAA100
Ball Joint Thread Protector, 14 mm 071AF-SZNA100
Ball Joint Remover, 32 mm 07MAC-SL00102
Ball Joint Remover, 28 mm 07MAC-SL00
SEE MORE:
NOTE: Before you troubleshoot, review the General Troubleshooting Information
for the AWD with
intelligent control system.
1. Problem verification (with engine idling):
Turn the vehicle to the OFF (LOCK) mode.
Clear the DTC with the HDS.
Start the engine.
Check for DTCs with the HDS.
Is DTC
Removal
1. Right Front Wheel - Remove
2. Front Splash Shield and Engine Undercover (With Engine Undercover) -
Remove
3. Drive Belt Auto-Tensioner - Remove
4. Drive Belt Idler Pulley Base - Remove
5. Crankshaft Pulley - Remove
6. Cylinder Head Cover - Remove
7. PCV Hose (Oil Pump Side) - Disconnect