Honda HR-V: Testing
- CVT Clutch Pressure Control Solenoid Valve Test (CVT)
- CVT Lock-Up Clutch Control Solenoid Valve Test (CVT)
- CVT Pressure Test (CVT)
- CVT Road Test (CVT)
- Correction of Inclination Sensor Learn Procedure with Driving the Vehicle (CVT)
- Inclination Sensor Initial Learn Procedure (CVT)
- Shift Lock Solenoid Test (CVT)
- Transmission Fluid Temperature Sensor Test (CVT)
READ NEXT:
CVT Clutch Pressure Control Solenoid Valve Test (CVT)
Test
1. Vehicle - Lift
2. Engine Undercover - Remove (With 2WD)
3. CVT Clutch Pressure Control Solenoid Valve - Test
Disconnect the connector (A).NOTE:
To prevent damage, cover the connector usin
CVT Lock-Up Clutch Control Solenoid Valve Test (CVT)
Test
1. Vehicle - Lift
2. Engine Undercover - Remove (With 2WD)
3. CVT Lock-Up Clutch Control Solenoid Valve - Test (On Vehicle)
Disconnect the connector (A).NOTE:
To prevent damage, cover the co
CVT Pressure Test (CVT)
Special Tools Required
Pressure Gauge Adapter 070AJ-RT4A101
A/T Oil Pressure Gauge Set 07406-0020400 or 07406-0020401
A/T Pressure Test Hose 07AAJ-PY4A100
A/T Pressure Adapter 07MAJ-PY40120
A/T Hi
SEE MORE:
Rear Door Protection Tape Removal and Installation
Removal
1. Rear Door Protection Tape - Remove
Remove the rear door protection tape (A).
NOTE : Slowly peel up the old
door protection tape while heating it with a hair dryer.
Installation
1. Rear Door Protection Tape - Install
Clean the door bonding surface with a sponge dampened in isoprop
Rear Door Latch Removal and Installation
Removal & Installation
1. Rear Door Panel - Remove
2. Rear Door Plastic Cover - Remove
Remove the plug cap (A)
Disconnect the connector (B)
Remove the rear door plastic cover (C) as needed.
NOTE : If the plastic
cover is damaged or torn, replace it with a new one.
3. Rear Door Inner Hand
© 2019-2026 Copyright www.hohrv2.com
