Honda HR-V Owners & Service Manuals

Honda HR-V: Audio System Theft Protection

Honda HR-V (2015-2021) Owner's Manual / Features / Audio System / Audio System Theft Protection

The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead. In certain conditions, the system may display ENTER CODE*2/Enter code*3. If this occurs, reactivate the audio system.

■ Reactivating the audio system

1. Turn the ignition switch to ON (II)*1.

2. Turn on the audio system.

3. Press and hold the audio system power button for more than two seconds.

  • The audio system is reactivated when the audio control unit establishes a connection with the vehicle control unit. If the control unit fails to recognize the audio unit, you must go to a dealer and have the audio unit checked.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.

*2: Models with color audio system.

*3: Models with display audio system.

Audio Remote Controls

Allow you to operate the audio system while driving.

SOURCE Button

Cycles through the audio modes as follows: FM AM
CD USB
iPod
Bluetooth
Audio Pandora*AhaTM*Apps*,
*1
AUX*/AUX HDMI*

(Volume) Buttons


Press : To increase the volume.


Press : To decrease the volume.


Audio System


Button


  • When listening to the radio Press : To select the next
    preset radio station.

    Press : To select the previous
    preset radio station.

    Press and hold : To select the
    next strong radio station.

    Press and hold : To select the
    previous strong radio station.

  • When listening to a CD, iPod, USB flash drive, or Bluetooth Audio Press : To skip to the next
    song.

    Press : To go back to the
    beginning of the current or previous song.

  • When listening to a CD or USB flash drive Press and hold : To skip to the
    next folder.

    Press and hold : To go back to
    the previous folder.

  • When listening to Internet radio* Press : To skip to the next song.

    Press and hold : To select the
    next station.

    Press and hold : To select the
    previous station.

Some mode appear only when an appropriate device or medium is used.

*1: Appears only when connected to HondaLinkTM.

Models with display audio system

Steering Wheel (Menu) Button


  • When listening to the radio Press : To display the menu
    items. You can select Scan, Save Preset, or Seek.
  • When listening to a CD or USB flash drive Press : To display the menu
    items. You can select Scan, Repeat, or Random.
  • When listening to an iPod Press : To display the menu
    items. You can select Repeat or Shuffle.
  • When listening to a Bluetooth Audio Press : To display the menu
    items. You can select Pause or Play.
  • When listening to a Pandora* Press : To display the menu
    items. You can select Bookmark, or Play/Pause.

The button is available only
when the audio mode is FM, AM, CD, USB, iPod, Pandora*, AhaTM*, or Bluetooth Audio.

    READ NEXT:

     Audio System Basic Operation (Models with color audio system)

    Models with color audio system To use the audio system, the ignition switch must be in ACCESSORY (I) or ON (II). Use the selector knob or MENU/CLOCK button to access some audio functions. Press to

     Audio/Information Screen

    Displays the audio status and wallpaper. From this screen, you can go to various setup options. ■Switching the Display ■ Audio Shows the current audio information. ■ Clock/Wallpaper Shows a cl

     Adjusting the Sound

    Press the (sound) button, and rotate to scroll through the following choices: Rotate to adjust the sound setting, then press . The SVC has four modes: Off, Low, Mid, and High. SVC adjusts the

    SEE MORE:

     Ridge Removal

    NOTE: Examples used in this article are general in nature and do not necessarily relate to a specific engine or system. Illustrations and procedures have been chosen to guide mechanic through engine overhaul process. Descriptions of processes of cleaning, inspection, assembly and machine shop pract

     Testing

    FRONT SEAT HEATER CONTROL UNIT INPUT TEST NOTE : Before testing, make sure the No. C19 (20 A), No. C24 (7.5 A), and No. C39 (10 A) fuses in the under-dash fuse/relay box are OK. 1. Disconnect the front seat heater control unit 14P connector. 2. Inspect the connector and socket terminals to be sure

    © 2019-2024 Copyright www.hohrv2.com