Honda HR-V: Cruise Control System - Testing & Troubleshooting
READ NEXT:
CRUISE CONTROL SYSTEM DESCRIPTION - OVERVIEW
The cruise control system maintains a constant vehicle speed without the
driver pressing the accelerator pedal.
Operation
To operate the cruise control sy
CRUISE CONTROL (ECM/PCM) INPUT TEST
NOTE: Always make sure that you have the latest HDS software.
1. Turn the vehicle to the OFF (LOCK) mode
2. Connect the HDS (Honda Diagnostic System) to the data li
CRUISE CONTROL SYMPTOM TROUBLESHOOTING INDEX
Cruise control system
Troubleshooting Index
CRUISE CONTROL CAN BE SET, BUT THE CRUISE CONTROL INDICATOR DOES NOT COME
ON
Diagnostic procedure
1. Enteri
SEE MORE:
Removal
1. Vehicle - Lift
2. Front Wheel - Remove
3. Stabilizer Link - Remove
Remove the self-locking nut (A) and the flange nut (B) while holding the
respective joint pin (C) with a hex wrench (D)
Remove the stabilizer link (E).
Installation
1. Stabilizer Link - Install
Fig. 16: Stabilizer
Removal & Installation
A-Pillar Trim
1. A-Pillar Trim - Remove
Remove the front door opening seal (A) as needed
Remove the A-pillar trim (B).
2. All Removed Parts - Install
Install the parts reverse order of removal.
B-Pillar Upper/Lower Trim
3. Front Door Sill Trim - Remove - Refer to: