Honda HR-V Owners & Service Manuals

Honda HR-V: Driveshafts - Service Information

Honda HR-V (2015-2021) Service Manual / Driveline & Axles / Driveshafts - Service Information

READ NEXT:

 Front Driveshaft Removal and Installation

Removal 1. Vehicle - Lift 2. Front Wheel - Remove 3. Spindle Nut - Remove Pry up the stake (A) on the spindle nut (B) Remove the spindle nut. 4. Engine Undercover - Remove 5. Transmission Fluid -

 Intermediate Shaft Removal and Installation

Removal and Installation 1. Transmission Fluid - Drain Drain the transmission fluid, then reinstall the drain plug with a new sealing washer M/T CVT 2. Right Driveshaft - Remove 3. Interm

 Rear Driveshaft Removal and Installation (AWD)

Removal 1. Vehicle - Lift 2. Rear Wheel - Remove 3. Rear Spindle Nut - Remove Pry up the stake (A) on the spindle nut (B) Remove the spindle nut. 4. Rear Differential - Remove 5. Rear Outboard Jo

SEE MORE:

 12 Volt Battery Removal and Installation

Removal 1. 12 Volt Battery Terminal - Disconnect 2. 12 Volt Battery - Remove Remove the 12 volt battery setting plate (A) and the 12 volt battery (B). Installation 1. 12 Volt Battery - Install Install the 12 volt battery (A) and the 12 volt battery setting plate (B). NOTE: Do not deform

 DTC B1127 Driver's Door Key Cylinder Switch Input Circuit Malfunction (Simultaneous Input of Lock and Unlock Signal)

DTC (MICU) NOTE : If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks. 1. Problem verification (driver's door key

© 2019-2024 Copyright www.hohrv2.com