Honda HR-V: How to Information
READ NEXT:
How to Check for DTCs With the HDS
NOTE:
There are three methods used to check for DTCs. The recommended method
is to use the Honda
Diagnostic System (HDS) with the appropriate software, plugged
Button/Switch/Indicator
How to Use the Self-Diagnostic Function
The HVAC control unit has a self-diagnostic function. To run the
self-diagnostic function, do the following:
1. Turn the vehicle to th
SEE MORE:
Removal
1. 12 Volt Battery Terminal - Disconnect
2. 12 Volt Battery - Remove
Remove the 12 volt battery setting plate (A) and the 12 volt
battery (B).
Installation
1. 12 Volt Battery - Install
Install the 12 volt battery (A) and the 12 volt battery setting plate
(B).
NOTE:
Do not deform
These screens allow you to troubleshoot the audio function. The ANC Check is
not supported in this model.
Speaker Check
NOTE:
Make sure the audio system is off before this diagnosis.
While doing the diagnosis, the fader and the balance positions are set
to the center.
This diagnosis checks t