Honda HR-V: Interior Lighting - Testing & Troubleshooting
READ NEXT:
INTERIOR LIGHTS SYSTEM DESCRIPTION - COMPONENTS
Front Individual Map Light
The front individual map light is equipped for all vehicles. The front
individual map light can be turned on and
off by pres
ENTRY LIGHTS CONTROL SYSTEM (MICU) INPUT TEST
NOTE :
If you are troubleshooting multiple DTCs, be sure to follow the
instructions in B-CAN System Diagnosis
Test Mode A - Refer to: Body Electrical
ENTRY LIGHTS CONTROL SYSTEM CIRCUIT DIAGRAM
INTERIOR LIGHTS CIRCUIT DIAGRAM
WIRING DIAGRAM
AMBIENT LIGHT, CARGO AREA LIGHT, CEILING LIGHT, GLOVE BOX LIGHT,
INDIVIDUAL
MAP LIGHTS AND VANITY MIRROR
SEE MORE:
The hydraulic control system is controlled by the transmission fluid pump,
the valves, and the solenoid valves. The transmission fluid pump is driven by
the engine turns. The transmission fluid
pump drive sprocket is connected to the stator shaft, turns as the engine turns,
and drives the transmi
When replacing, use the following bulbs.
Rear Turn Signal Light: 21 W (Amber)
1. Use a Phillips-head screwdriver to remove
the bolts.
2. Pull the light assembly out of the rear pillar.
3. Turn the socket to the left and remove it.
4. Remove the old bulb.
5. Insert a new bulb.
6. Slide the light