Honda HR-V: Moonroof - Service Information
READ NEXT:
Removal & Installation
1. Moonroof Glass - Remove
2. Drain Channel - Remove
Remove the screws securing the drain channel (A).
Release the drain channel (A) from both hooks (B) of the drain
Removal & Installation
SRS components are located in this area. Review the SRS component locations -
Refer to: SRS Component
Location Index (KA/KC), or SRS Component Location Index (KA/KC) and th
Removal & Installation
1. Moonroof Glass - Remove
Remove the bolts with a TORX T25 bit
Repeat on the opposite side.
Remove the glass (A) by lifting it up.
2. All Removed Parts - Install
SEE MORE:
MTF INSPECTION AND REPLACEMENT (M/T)
Inspection
1. Vehicle - Lift
2. Engine Undercover - Remove
3. MTF - Check
Remove the oil check bolt (A) and the 6 mm sealing washer (B)
Check the condition of the MTF and make sure it is at the proper level
(C).NOTE: If the fluid is dirty, replace the MTF.
Removal & Installation
1. Vehicle - Lift
2. Rear Wheels - Remove
3. Parking Brake - Release
4. Rear Wheel Speed Sensor - Remove
5. Rear Brake Calliper - Remove
6. Rear Brake Disc - Remove
7. Hub Bearing Unit - Remove - Refer to: Rear Hub Bearing Unit Removal and
Installation (2WD), or Rear Hub