Honda HR-V: Network Communication - Testing & Troubleshooting
Honda HR-V (2015-2021) Service Manual / Accessories & Equipment / Network Communication - Testing & Troubleshooting
READ NEXT:
Description
COMMUNICATION SYSTEMS DESCRIPTION (F-CAN) - OVERVIEW
F-CAN (High-speed CAN)
The network between the powertrain and control units for chassis system is
called F-CAN and it employs high
speed CAN with
DTC Troubleshooting
NETWORK COMMUNICATION DTC TROUBLESHOOTING INDEX
NOTE : Record all DTCs, and sort them by DTC type using the DTC
troubleshooting index, then troubleshoot
the DTC(s) in this order:
Internal error DTC
SEE MORE:
DTC 1302 GPS Receiver Error 1
NOTE:
Check the vehicle 12 volt battery condition first.
This audio DTC sets when there is an internal GPS receiver problem
(freeze error).
Before you troubleshoot, make sure to follow the General Troubleshooting
Information.
1. Problem verification:
Clear the hard error codes.
Turn the
A/C Signal Circuit Troubleshooting
1. A/C compressor clutch condition check.
Start the engine, and let it idle.
Turn the blower switch on.
Turn the A/C switch on.
Check the parameter(s) below with the HDS.
Do the current condition(s) match the threshold?
YES
Go to step 2.
NO
Do the A/C system test.
2. A/C system check.
Check
© 2019-2024 Copyright www.hohrv2.com
