Honda HR-V: Parking Brake System - Testing & Troubleshooting
READ NEXT:
ELECTRIC PARKING BRAKE SYSTEM DESCRIPTION - CLUTCH PEDAL STROKE SENSOR
The clutch pedal stroke sensor is located in the clutch pedal bracket. The
clutch pedal stroke sensor detects the
level of clutc
DTC TROUBLESHOOTING
ELECTRIC PARKING BRAKE DTC TROUBLESHOOTING INDEX
TESTING
ELECTRIC PARKING BRAKE CONTROL UNIT UPDATE
Special Tools Required
MVCI unit with
the latest control
module (CM)
update so
SEE MORE:
SRS components are located in this area. Review the SRS component locations -
Refer to: SRS Component Location Index (KA/KC), or SRS Component Location Index
(KA/KC) and the
precautions and procedures before doing repair or service.
1. Problem verification:
Connect the HDS to the DLC - Refer to:
Removal
1. Vehicle - Lift
2. Front Wheel - Remove
3. Stabilizer Link - Remove
Remove the self-locking nut (A) and the flange nut (B) while holding the
respective joint pin (C) with a hex wrench (D)
Remove the stabilizer link (E).
Installation
1. Stabilizer Link - Install
Fig. 16: Stabilizer