Honda HR-V: Playing the AM/FM Radio
.png)
The ST indicator appears on the display indicating stereo FM broadcasts.
Stereo reproduction in AM is not available.
You can store 6 AM stations and 12 FM stations into the preset memory.
Switching the Audio Mode Press the SOURCE button on the steering wheel.
■Radio Data System (RDS)
Provides text data information related to your selected RDS capable FM station.
■ To find an RDS station from Station List
1. Press .png)
while listening to an
FM station.
2. Rotate .png)
to select the station,
then press .png)
.
■ Update List
Updates your available station list at any time.
1. Press .png)
while listening to an
FM station.
2. Rotate .png)
to select Update List,
then press .png)
.
■ Radio text
Displays the radio text information of the selected RDS station.
1. Press the MENU/CLOCK button.
2. Rotate .png)
to select Settings, then
press .png)
.
3. Rotate .png)
to select RDS Settings,
then press .png)
.
4. Rotate .png)
to select Radio Text,
then press .png)
.
■ Scan
Samples each of the strongest stations on the selected band for 10 seconds.
1. Press the MENU/CLOCK button.
2. Rotate .png)
to select Scan, then
press .png)
.
To turn off scan, press .png)
.
When you select an RDS-capable FM station, the RDS automatically turns on, and the frequency display changes to the station name. However, when the signals of that station become weak, the display changes from the station name to the frequency.
READ NEXT:
Playing a CD
Your audio system supports audio CDs, CD-Rs, and CD-RWs in either MP3 or WMA,
or AAC*1 format. With the CD loaded, press the CD/AUX button.
*1:Only AAC format files recorded with iTunes are playable
Playing an iPod
Connect the iPod using your dock connector to the USB port, then press the
CD/
AUX button.
■How to Select a Song from the iPod Music List with the
Selector Knob
1. Press to display the iPod
musi
Playing a USB Flash Drive
Your audio system reads and plays sound files on a USB flash drive in either
MP3,
WMA or AAC*1 format.
Connect your USB flash drive to the USB port, then press the CD/AUX button.
*1:Only AAC format
SEE MORE:
DTC Troubleshooting 68-12: Brake Pedal Position Switch Stuck ON
NOTE: Before you troubleshoot, review the general troubleshooting
information.
1. VSA modulator-control unit performance check:
Start the engine.
Check the parameter(s) below with the HDS. Do not press the brake pedal.
Is there 10 MPa or more?
YES
Go to step 2.
NO
Go to step 3.
2. Brake pedal
Description
CHARGING SYSTEM DESCRIPTION - OVERVIEW
Overview
The PCM gathers vehicle operating system data and determines the required
charging rate. Based on that data,
the PCM commands the alternator to provide a specific charging rate (voltage)
between 12.5 and 14.5 volts,
using 1/10th volt steps. In some o
