Honda HR-V: Supplemental Restraint System - Diagnostics
READ NEXT:
Special Tools Required
SRS Inflator Simulator 07SAZ-TB4011A
SRS Simulator Lead J 070AZ-SNAA100
NOTE:
Before doing this troubleshooting procedure, find out if the vehicle was
in a collision. If
Special Tools Required
SRS Inflator Simulator 07SAZ-TB4011A
SRS Simulator Lead J 070AZ-SNAA100
NOTE:
Before doing this troubleshooting procedure, find out if the vehicle was
in a collision. If
SEE MORE:
NOTE:
Before testing, check the No. C1 (20 A), No. C4 (10 A), No. C5 (10 A),
No. C6 (10 A), No. C7 (10 A),
No. C12 (10 A), and No. C13 (10 A) fuses in the under-dash fuse/relay box
are OK.
There are two pairs of fuses in the same circuit (No. C6 and No. C7
fuses, No. C5 and No. C13 fuses,
Models With Information Display
1. Inflate tires to correct pressure.
2. Apply parking brake.
3. Turn Ignition ON.
4. Press and hold the TPMS button. The MIL will flash.
5. Release parking brake.
6. Drive vehicle.
NOTE: If the MIL does not blink a few the relearn procedure did not take.
Repeat