Honda HR-V: Symptom Troubleshooting
READ NEXT:
Diagnostic procedure
1. F-Can Circuit Troubleshooting
2. VSA System Symptom Troubleshooting - VSA cannot be turned OFF or VSA
System Symptom
Troubleshooting - ABS indicator, brake system indicator (r
1. DTC check:
Turn the vehicle to the ON mode.
Check for DTCs with the HDS.
Are there DTCs indicated?
YES
Do the DTC troubleshooting.
NO
Go to step 2.
2. Gauge control module operation check.
D
VSA cannot be turned OFF
NOTE: If the low tire pressure indicator turns ON, the VSA cannot be turned
OFF. Check the tire pressure first.
1. VSA OFF switch check:
Turn the vehicle to the OFF (LOCK)
SEE MORE:
Special Tools Required
SRS Inflator Simulator 07SAZ-TB4011A
SRS Simulator Lead L 070AZ-SNAA300
NOTE:
Before doing this troubleshooting procedure, find out if the vehicle was
in a collision. If so, verify
that all the required components were replaced with new components of the
correct par
NOTE: Before you troubleshoot, review the general troubleshooting
information.
DTC (EPS)
1. Problem verification.
Turn the vehicle to the ON mode.
Clear the DTC with the HDS.
Clear DTCs
Turn the vehicle to the OFF (LOCK) mode, then start the engine.
Turn the steering wheel to left and right