Honda HR-V: Testing
READ NEXT:
Test
SRS components are located in this area. Review the SRS component locations -
Refer to: SRS Component Location Index (KA/KC), or SRS Component Location Index
(KA/KC) and the precautions and proc
Start-Up Procedure and Diagnostic Menu
NOTE: Check the vehicle 12 volt battery condition first.
1. Start the engine
2. Press the POWER ()
button to turn off the audio unit
3. Press and hold the prese
NOTE:
This diagnosis is applied to the audio unit (without navigation) only.
Refer to the navigation system section for audio-navigation unit System
Diagnostic Mode.
The screens detail indicate
SEE MORE:
POWER STEERING ASSIST CHECK
Check
1. Power Steering Assist - Check
NOTE: This test should be done with original equipment tires and wheels at
the
correct tire pressure.
Start the engine, and let it idle
Attach a commercially available spring scale (A) to the steering wheel.
With the
engine i
NOTE:
Refer to the DTC code shown on the display, and then inspect the
connectors and terminals based on the instructions in the table below.
The DTC may be stored due to the grounding failure or the power source
failure at the transmitting
control unit (the grounding inspection and the powe