Honda HR-V: Audio Visual Systems - Testing & Troubleshooting
Honda HR-V (2015-2021) Service Manual / Accessories & Equipment / Audio Visual Systems - Testing & Troubleshooting
- Description
- Testing
- General Information
- Symptom Troubleshooting
- Troubleshooting
- Connector Inputs and Outputs
- How to Information
READ NEXT:
Audio System Description - Overview
Overview
The Audio and Visual system consists of digital audio/video playback
function, wireless communication to the customer's device, and displaying the
driver's support information.
Audio Unit a
Audio (Audio-Navigation) Unit Functions
GA-Net Bus Configuration
The XM receiver passes the signals to the audio-navigation unit via the
GA-Net bus. Any open connections or short in the wiring in the GA-Net bus
circuit will cause audio
(i
SEE MORE:
DTC Troubleshooting 25-121, 26-121, 28-121: Sensor (Inside of
Modulator-Control Unit) Output Signal Malfunction
NOTE:
Before you troubleshoot, review the general troubleshooting information.
The yaw rate-acceleration sensor is built into the VSA modulator-control
unit.
Before troubleshooting, check the VSA modulator-control unit for proper
mounting. Improper mounting
of the VSA modulator-control unit
Rear Bumper Reflector Removal and Installation
Removal & Installation
1. Rear Inner Fender - Remove
Remove the rear inner fender - Refer to: Front Inner Fender Removal and
Installation, or Rear
Inner Fender Removal and Installation as needed.
2. Rear Bumper Reflector - Remove
Remove the screws.
Remove the rear bumper reflector (
© 2019-2026 Copyright www.hohrv2.com
