Honda HR-V: Multi-View Rear Camera
Models with navigation system
See the Navigation System Manual.
Models without navigation system
About Your Multi-View Rear Camera
The audio/information screen can display your vehicle's rear view.
The display automatically changes to a rear view when the shift lever is moved to (R).
The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.
Visually confirm that it is safe to drive before backing up. Certain conditions (such as weather, lighting, and high temperatures) may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle.
If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.
Models with display audio system
You can change the Fixed Guideline and Dynamic Guideline settings.
Fixed Guideline
On: Guidelines appear when you shift into (R.
Off: Guidelines do not appear.
Dynamic Guidelines
On: Guidelines move according to the steering wheel direction.
Off: Guidelines do not move.
■Multi-View Rear Camera Display Area
.png)
You can view three different camera angles on the rearview display.
Models with color audio system
Press the LIST/SELECT (selector) knob to switch the angle.
Models with display audio system
Touch the appropriate icon to switch the angle.
.png)
: Wide view
.png)
: Normal view
.png)
: Top down view
All models
If the last used viewing mode is Wide or Normal, the same mode is selected the next time you shift into (R). If Top View is last used before you turned off the engine, Wide mode is selected next time you turn the ignition switch to ON (II)*1 and shift to (R).
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
READ NEXT:
Fuel Information
NOTICE
We recommend quality gasoline containing
detergent additives that help prevent fuel system and
engine deposits. In addition, in order to maintain
good performance, fuel economy, and emissions
c
How to Refuel
1. Stop your vehicle with the service station
pump on the left side of the vehicle in the
rear.
2. Turn off the engine.
3. Pull on the fuel fill door release handle
under the lower left corner of th
SEE MORE:
Front Grille Stay Removal and Installation
Removal & Installation
1. Front Grille Cover - Remove
2. Front Grille Center Stay - Remove
3. Front Grille Side Stay - Remove
4. All Removed Parts - Install
Install the parts in the reverse order of removal.
FRONT INNER FENDER REMOVAL AND INSTALLATION
Removal & Installation
1. Front Spl
DTC Troubleshooting 56-11: Fail-Safe Relay Power Source Malfunction
NOTE: Before you troubleshoot, review the general troubleshooting
information.
1. Problem verification:
Turn the vehicle to the ON mode.
Clear the DTC with the HDS.
Turn the vehicle to the OFF (LOCK) mode.
Turn the vehicle to the ON mode, then wait for at least 10 seconds or
more.
Turn the
