Honda HR-V: Windows & Glass - Testing & Troubleshooting
READ NEXT:
POWER WINDOWS SYSTEM DESCRIPTION - COMPONENTS
Power Window Master Switch
The power window master switch is installed in the driver's door panel.
Power Window Motors
The motor includes the pulse sensor
Test
Motor Test
1. Driver's Door Panel - Remove
2. Driver's Power Window Motor - Test
Test the motor in each direction by connecting 12 volt battery power
and ground to the connector (A) accordin
SEE MORE:
Special Tools Required
Fuel Nut Wrench 07AAAT0AA100
Removal
1. Fuel Pressure - Relieve
2. Front Seat (Driver's Side) - Remove
3. Rear Heater Duct (Left Side) - Remove
4. Access Panel - Remove
Remove the access panel (A) from the floor
Disconnect the connector (B).
5. Fuel Tank Unit Locknut -
1. Immobilizer system check.
Connect the HDS to the data link connector (DLC).
Turn the vehicle to the ON mode.
From the SYSTEM SELECTION MENU, enter IMMOBI, then select IMMOBILIZER
INFO.
NOTE: If the HDS does not communicate with the immobilizer-keyless control
unit, check the power,
ground