Honda HR-V: Differential - Testing & Troubleshooting
READ NEXT:
Removal
1. Rear Left Side Trim Panel - Remove - Refer to: Interior Trim
Removal and Installation - Rear Side
Area, or
2. AWD Control Unit - Remove
Turn the vehicle to the OFF (LOCK) mode
Loosen t
Removal & Installation
1. Vehicle - Lift
2. Rear Differential Breather Box and Hose - Remove
Rear differential pump motor
Rear differential
Disconnect the breather hoses
(A).
Remove the b
SEE MORE:
When wheel speed is significantly reduced from estimated vehicle speed, the
VSA modulator-control unit
closes the inlet valve and opens the outlet valve momentarily to reduce brake
fluid pressure and the pump motor
starts to run. As wheel speed increases, the VSA modulator-control unit
maintains
Special Tools Required
SRS Inflator Simulator 07SAZ-TB4011A
SRS Simulator Lead J 070AZ-SNAA100
NOTE:
Before doing this troubleshooting procedure, find out if the vehicle was
in a collision. If so, verify
that all the required components were replaced with new components of the
correct par