Honda HR-V: DTC Troubleshooting
READ NEXT:
NOTE: Before you troubleshoot, review the general troubleshooting
information.
DTC (EPS)
1. Problem verification.
Turn the vehicle to the ON mode.
Clear the DTC with the HDS.
Clear DTCs
NOTE:
Troubleshoot any PGM-FI system DTCs first - Refer to: How to
Troubleshoot the Fuel and Emissions
Systems, or How to Troubleshoot the CVT System (CVT).
Before you troubleshoot, review the g
NOTE: Before you troubleshoot, review the general troubleshooting
information.
DTC (EPS)
1. Problem verification.
Turn the vehicle to the ON mode.
Clear the DTC with the HDS.
Clear DTCs
Turn t
SEE MORE:
Removal & Installation
1. Passenger's Dashboard Undercover - Remove
2. Blower Motor - Remove
Disconnect the connector (A)
Remove the harness clip (B)
Remove the blower motor (C).
3. All Removed Parts - Install
Install the parts in the reverse order of removal.
NOTE: Make sure that there
Special Tools Required
Driver Handle, 40 mm I.D. 07746-0030100
Bearing Driver Attachment, 30 mm I.D.
07746-0030300
Snap Ring Pliers 07LGC-0010100
Removal
1. Secondary Drive Gear - Remove
Remove the snap ring (A) using the snap ring pliers.
Remove the cotter retainer (A) and the cotters (B