Honda HR-V Owners & Service Manuals

Honda HR-V: Maintenance Under the Hood

Honda HR-V (2015-2021) Owner's Manual / Maintenance / Maintenance Under the Hood

READ NEXT:

 Maintenance Items Under the Hood

Opening the Hood 1. Park the vehicle on a level surface, and set the parking brake. 2. Pull the hood release handle under the lower left corner of the dashboard. The hood will pop up slightly. 3

 Recommended Engine Oil

Genuine Honda Motor Oil Premium-grade 0W-20 detergent oil with an API Certification Seal on the container. Oil is a major contributor to your engine's performance and longevity. If you drive th

 Oil Check

We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Wait approximately three minutes after turning the engine off before you check the oil. 1.

SEE MORE:

 Front Knuckle/Hub/Wheel Bearing Replacement

Special Tools Required Ball Joint Thread Protector, 12 mm 07AAF-SDAA100 Ball Joint Thread Protector, 14 mm 071AF-SZNA100 Ball Joint Remover, 32 mm 07MAC-SL00102 Ball Joint Remover, 28 mm 07MAC-SL00202 Driver Handle, 15 x 135L 07749-0010000 Bearing Driver Attachment, 42 x 47 mm 07746-0010300 Pi

 VTEC System Description (KA/KC)

Overview This system improves fuel efficiency and reduces exhaust emissions at all levels of engine speed, vehicle speed, and engine load. The VTEC mechanism changes the valve lift and timing by using more than one cam profile. The VTEC system changes the cam profile (angle) at cruising speeds. (

© 2019-2026 Copyright www.hohrv2.com