Honda HR-V: Moonroof - Testing & Troubleshooting
READ NEXT:
MOONROOF GLASS POSITION ADJUSTMENT
Adjustment
1. Moonroof Glass Position - Check
The roof panel (A) should be even with the glass roof seal (B) to within
0-1/-1
mm (0-0.04/-0.04 in) all the way
MOONROOF SYSTEM DESCRIPTION - COMPONENTS
Moonroof Switch
The moonroof switch is mounted in the front individual map light assembly.
MOONROOF SYSTEM DESCRIPTION - CONTROL/FUNCTION
Operation (Manual)
Th
MOONROOF MOTOR-CONTROL UNIT INPUT TEST
NOTE :
Testing
Before testing, make sure the No. C18 (20 A) and No. C39 (7.5 A) fuses
in the under-dash fuse/relay box
are OK.
If the moonroof works OK man
SEE MORE:
NOTE:
Check the vehicle 12 volt battery condition first.
Set the fader and the balance positions to the center.
Before doing this troubleshooting, go to Audio unit power switch will
not turn on (No information display and no sound).
Check the connectors for poor connections or loose terminals
NOTE: If necessary, compare the noise with a known-good vehicle of the same
type. If the noise is remarkably
abnormal, do the following troubleshooting.
1. Problem verification (abnormal noise check) 1.
Test drive the vehicle and check for the abnormal noise.
Did the abnormal noise reappear?
YES