Honda HR-V: Continuously Variable Transmission (CVT) - Service Information
READ NEXT:
Special Tools Required
Bearing Driver Attachment, 62 x 68 mm
07746-0010500
Driver Handle, 15 x 135L 07749-0010000
Bearing Driver Attachment, 62 x 64 mm
07947-6340400
Replacement
NOTE:
The c
Special Tools Required
Driver Handle, 15 x 135L 07749-0010000
Oil Seal Driver, 65 mm 07JAD-PL90100
Oil Seal Driver Attachment, 58 mm
07JAD-PH80101
Replacement
NOTE: Apply a light coat of clean tran
Removal and Installation
NOTE: Keep all foreign particles out of the transmission.
1. Vehicle - Lift
2. Engine Undercover - Remove (With 2WD)
3. Left Front Splash Shield - Remove
4. CVT Driven Pulley
SEE MORE:
1. Fuse check.
Check the following fuses.
Are the fuses OK?
YES
Reinstall the fuses, then go to step 2.
NO
Replace the fuse(s), and recheck. If the fuse(s) blows again, repair the
short to ground on the No. B12 (30
A), the No. B31 (7.5 A), and/or the No. C24 (7.5 A) fuse circuit(s).
2. Radiator
NOTE:
Before doing this troubleshooting procedure, find out if the vehicle was
in a collision. If so, verify
that all the required components were replaced with new components of the
correct part number,
and that they were properly installed.
Before doing this troubleshooting procedure, rev